Safelux

SafeLuxPLUS illuminates indoor spaces with natural light, leaving the associated heat and glare outside. Its short tube design and allows free movement.
suninside-copy
With its ceiling-flush installation, Safelux minimises its own presence and illuminates the foreground.
suninside-copy
1. Collection system
Clear, UV resistant polycarbonate dome with flange
Parameter Specifications
Transmission Minimum 80%
Refractive Index 1.58
Service Temperature -10°C to 80°C
Thickness 2mm at flange

2. Guidance System
Specifications
Aluminium Sheet Thickness: 0.4mm – 0.5mm
The film surface should have a luminous reflectivity of 98% and a bandwidth reflectivity of over 90% for 400 to 775nm wavelength of light incident between 0 to 80 degrees.

3. Diffuser
Parameter Specifications
Diffuser type
4. Roof mounting system
Leak proof installation of the system on customer roof

Specifications
The system is installed in such a way that the light guidance component of the system is dustproof. This is necessary to prevent dust from entering the tube to ensure reflectivity is maintained. It is also to ensure that the air column inside the tube will act as an insulator for heat. Daylighting system complete assembly to be installed on FRP Base of profile which will match the roofing sheet. All installation to be done by cutting hole on the roof and placing the FRP base above this hole.

Technical Specifications

Tube Diameter Tube Length Typical Coverage Area
500 mm 1250 mm 750 sq.ft to 1100 sq.ft
750 mm 1250 mm 1400 sq.ft to 1750 sq.ft
Trusted by over 6,000 customers around the world
India’s largest ventilator manufacturer, installer, and exporter with more than 70% returning customers